LINE FOR FILLING CANS WITH GRANULAR AT NITROGEN PROTECTION ATMOSPHERE
This product is applicable for various round cans to quantitatively weigh, fill and seam granules, sheets, strips and irregularly shaped materials like melon seeds, peanuts, candies, pistachio nuts, nutlets, nuts, leisure food and meat.
With reliable quality and easy operation, it is ideal equipment necessary for such industries as food, pharmacy and chemical engineering.
The machine has a wide range of application since weighing, filling and seaming can be realized for different-sized round cans by replacing dies only;
The machine is highly automatic and easily operated with PLC control and human-machine interface touch panel;
High weighing accuracy is ensured with high-precision combined weigher and by directly setting gram weight on the touch panel;
Corresponding weighing, filling and seaming are conducted only when there is a can;
The outer housing and main parts are made of 304 stainless steel.
The line includes:
Z type bucket elevator
10-head combine weigher
Automatic Vacuum Filling Nitrogen Can sealing machine,
Cans turning machine
Lid capping machine
Device for make a can in good position.
Capacity: 30-80 cans /min
Power supply: 380 V / 50 Hz
Diameter: 1200 mm US 47"
Z type bucket elevator
The elevator buckets material can be food grade PP material,which can resistance high and low temperature.
Continuous overlapping bucket lift virtually eliminates spillage.
Gentle handling and quiet operation.
Single or multiple discharge points available.
Low noise and maintenance.
Bucket Volume: 1.8 L
Made material: Stainless steel
Capacity: 4-6.5 m3 /h
Outlet height: 2500 mm US 98"
Infeed length: 863 mm US 34"
Power supply: 380 V, 50 Hz
Power: 0.75 kW
Dimension: 2800 x 780 x 4000 mm US 110" x 31" x 157"
10 head combine weigher
Suitable for packaging that requires high precision and fragile bulk, such as: puffed food, potato chips, casserole, candy, pistachio, peanuts, beans, apple slices, dumplings, dumplings, herbs, vegetables, fruits, etc.
Made of stainless steel, all welded, rounded corners, with minimal dust accumulation.
The control system is modular, easy to maintain and low in cost.
Professional digital weighing module with better stability and high precision.
The stepper motor drive is modular, easy to maintain and low in cost.
IP65 grade waterproof and dustproof design, more suitable for wet and dusty work.
Control weighing and discharging in sequence to avoid material blockage.
Adjust the amplitude separately for easier operation.
Multi-language operating system.
Weighing range: 3-6500 g
Weighing accuracy:±0.3-3 g (depending on material properties)
Weighing speed: 120 WPM
Hopper volume: 1.6 L
Display: 7-inch color touch screen
Default parameters: 99 kinds
Power supply: 230 V/ 50 Hz
Power: 2 kW
Weight: 490 kg US 1080 lb
This device are made of stainess steil.
Dimensions: 2400 x 2400 x 1700 mm US 94" x 94" x 67"
Convey belt for transport cans.
Independent control of the hopper with PLC control.
Length: 2.4 m US 94"
Conveyor belt height from the ground: 900 mm US 35" ( adjustable ±50mm/ 2" )
Independent control of the hopper with PLC control
Automatic Vacuum Filling Nitrogen Can sealing machine:
The main parts of the machine and the structure are made of SUS304 stainless steel.
The material which seal the vacuum system is silicon.
Lid combination control device: when the can’s body go in the machine, the lid will allocated. No can’s body no lid.
Automatic control, with the Panasonic programmable controller—PLC, set the parameters on the Touch screen.
All pneumatic components and solenoid valves use AirTAC.
Panasonic digital pressure sensor, high-precision.
The whole process was carried out in a sealed room.
Packing speed: 8-10 Cans / min
Packing container size: φ70-127 mm US 3-5"
Height: 80-190 mm US 3-7"
Machine Power: 4 kW
Total weight: 500 kg US 1102 lb
Dimensions: 2000 x 800 x 1850 mm US 79" x 31" x 73"
Air Pressure: ≥ 0.6 MPa
Air consumption: 80 L / min
Nitrogen pressure: ≥ 0.4 Mpa
Nitrogen Consumption: 50 L / min
Cans turning machine device:
Easy to clean and wash.
Specification and can size one to one，
Replacement of product specifications must be matched with the corresponding can turning parts
Main material：Food grade rigid PVC board
High lid capping machine:
Automatic unscrambling and feeding deep cap.
Stainless steel structure.
Touch screen display
Easy to operate
Capping speed: 30 - 50 cans / min
Can specification: φ125-130 mm US 5-5,11"
Height:150-200 mm US 6-8"
Lid hopper dimension: 1050 x 740 x 960 mm US 41" x 29" x 38"
Lid hopper volume: 300 L
Power supply: 230 V/ 50 Hz US 110 V / 50 Hz
Total power: 1.42 kw
Air supply: 6 kg / m2 US 13 lb / m2
Overall dimensions: 2350 x 1650 x 2240 mm US 92" x 65" x 88"
Conveyor speed: 14 m / min US 551" / min