PNEUMATIC L-TYPE SEALER FQL 450C
Pneumatic sealer designed for packaging products with half-sleeve foil.
The product should be placed in the foil, in the welding chamber, and then the arm of the device should be pressed.
Two perpendicular bars welded foil and cut off its excess, resulting in a bag.
Angle welding machine is used in all industries, mainly in the packaging of single items, such as boxes, fruit, but also in the creation of bulk packaging, such as candle candles.
The FQL-450C operates in the semi-automatic mode (the cycle takes place after pressing the button) or automatic (we set the interval between subsequent cycles).
After pressing the button, the arm is lowered, the foil is welded and cut off.
After welding, the arm lifts automatically and the conveyor carries away the finished product.
The device has a welding time regulator. If you use a heat-shrinkable film, products packed with the FQL welding machine can then be shrunk in a shrink tunnel - it allows you to create packs.
A compressor with a pressure of 6-8 kg / cm3 is required to operate the device.
Power: 1.2 kW
Power supply: 230V / 50Hz/ 110 V
Transporter speed: up to 10 m / min. / 394"
Capacity: up to approx. 750 pieces / h
The length of the seal: 500, 450 mm/ 20", 18"
The width of the weld: 1 mm/ 0,04"
Welding time: about 1 - 3 s
Film thickness: 0.015 - 0.08 mm/ 0,0001-0,003"
Dimensions of the machine [length x width x height]: 1450 x 850 x 960 mm/ 57" x 33" x 38"
Weight: 125 kg/ 276 Ib